Tablet Powering Off

Common Causes After a Factory Reset:

usually points to a hardware problem, like a failing battery, damaged power button, or motherboard issue, or potentially a persistent malware/firmware corruption that survives a standard reset, indicating deep software damage or a bad component preventing proper function. Check the battery health and power button first, ensure it’s not overheating, and if issues persist after a full charge and reset, a technician is needed. 

• Battery Degradation: An old or failing battery can’t provide stable power, causing shutdowns, especially under load, even if it shows a decent charge.
• Power Button Issues: A stuck, jammed, or faulty power button can send continuous signals, making the tablet think it’s being pressed or reset, causing loops or shutdowns.
• Overheating: While less common right after a reset, underlying heat issues or a poor cooling system can trigger shutdowns as a safety measure.
• Corrupted Firmware/Deep Software Glitch: Sometimes, core system files are so damaged they can’t recover even with a factory reset, leading to immediate crashes.
• Hardware Fault: A bad motherboard, loose internal connection, or damaged charging port can cause power instability.

Troubleshooting Steps:

• Charge Fully: Plug it in and charge for a few hours to rule out a simple low-battery issue.
• Inspect Hardware:
  • Remove the case and check the power button for stickiness or normal click feel.
  • Look for any signs of battery swelling (if removable) or damage.
• Perform a Soft Reset (Force Restart): Hold the power button (and Volume Down, if needed) for 30+ seconds to force a hardware-level restart.
• Boot in Safe Mode (if possible): See if the issue persists without any third-party apps running. If it stays on, a specific app was the culprit (though less likely after a factory reset).
• Check for Overheating: Ensure vents are clear and the device isn’t getting hot during startup.