Dymo LetraTag Printer

1st. To get your DYMO LetraTag (specifically the Bluetooth-enabled 200B model) to work wirelessly, install batteries, turn on the device, and pair it with your smartphone via the DYMO LetraTag Connect app. Ensure Bluetooth and location services are enabled on your phone to establish a connection within 10 meters.
Steps to Wireless Setup (LetraTag 200B)
  1. Power On: Insert batteries and turn on your LetraTag 200B printer.
  2. Download App: Install the DYMO LetraTag Connect app from the Apple App Store or Google Play Store.
  3. Enable Bluetooth & Location: Turn on Bluetooth and Location services on your phone.
    • Note: Location permission is required for Bluetooth to work properly on Android/iOS.
  4. Pair in App: Open the app and create a label; it will automatically prompt you to connect to the printer.
To get your DYMO LetraTag (specifically the Bluetooth-enabled 200B model) to work wirelessly, install batteries, turn on the device, and pair it with your smartphone via the DYMO LetraTag Connect app. Ensure Bluetooth and location services are enabled on your phone to establish a connection within 10 meters.
Steps to Wireless Setup (LetraTag 200B)
  1. Power On: Insert batteries and turn on your LetraTag 200B printer.
  2. Download App: Install the DYMO LetraTag Connect app from the Apple App Store or Google Play Store.
  3. Enable Bluetooth & Location: Turn on Bluetooth and Location services on your phone.
    • Note: Location permission is required for Bluetooth to work properly on Android/iOS.
  4. Pair in App: Open the app and create a label; it will automatically prompt you to connect to the printer.
Troubleshooting Connection Issues
  • Pairing Failed: If the app cannot find the printer, try restarting the printer, enabling Bluetooth/location permissions in your phone’s settings, or reinstalling the app.
  • Reset the Printer: Remove the batteries, press the on/Off button 10 times to drain power, then reinsert batteries.
  • Print within Range: The Bluetooth range is approximately 10 meters (33 feet).

2nd. To set up the DYMO LetraTag 200B, install 4 AA batteries and a label cassette, then turn on the printer. Download the DYMO LetraTag Connect app on iOS or Android, activate Bluetooth and location services, and open the app to automatically pair—no manual pairing in phone settings is required.

Initial Hardware Setup
  1. Insert Batteries: Open the battery compartment on the bottom and insert 4 AA batteries.
  2. Load Labels: Open the rear cover and insert a LetraTag cassette, ensuring it clicks into place.
  3. Power On: Press the power button.
App Installation and Connection
  1. Download App: Download the DYMO LetraTag Connect app from the Apple App Store or the Google Play Store.
  2. Enable Permissions: Turn on Bluetooth and Location Services on your phone. Note: Location services are required for Bluetooth functionality on Android and iOS.
  3. Connect: Open the app. The app will automatically detect and pair with the LetraTag 200B without needing to go to your phone’s Bluetooth settings.
Printing Labels
  1. Tap the “+” or “Create” button in the app to start a new label.
  2. Type text, add icons, or change fonts in the app.
  3. Tap Print to send the design to the label maker.
Troubleshooting Connection
  • Permissions: If the printer isn’t found, check settings to ensure “Nearby devices” (Android) or Bluetooth permissions are allowed for the app.
  • Distance: Ensure your phone is within 10 meters (33 feet) of the printer.
  • Restart: If connectivity fails, close the app and turn the label maker off and on again.